Set-PveClusterSdnZones

Update sdn zone object configuration.

API: PUT /cluster/sdn/zones/{zone}, Proxmox VE API viewer

Syntax

Set-PveClusterSdnZones
    [-PveTicket <PveTicket>]
    [-AdvertiseSubnets <bool>]
    [-Bridge <string>]
    [-BridgeDisableMacLearning <bool>]
    [-Controller <string>]
    [-Delete <string>]
    [-Dhcp <string>]
    [-Digest <string>]
    [-DisableArpNdSuppression <bool>]
    [-Dns <string>]
    [-Dnszone <string>]
    [-DpId <int>]
    [-Exitnodes <string>]
    [-ExitnodesLocalRouting <bool>]
    [-ExitnodesPrimary <string>]
    [-Fabric <string>]
    [-Ipam <string>]
    [-LockToken <string>]
    [-Mac <string>]
    [-Mtu <int>]
    [-Nodes <string>]
    [-Peers <string>]
    [-Reversedns <string>]
    [-RtImport <string>]
    [-SecondaryControllers <array>]
    [-Tag <int>]
    [-VlanProtocol <string>]
    [-VrfVxlan <int>]
    [-VxlanPort <int>]
    -Zone <string>
    [<CommonParameters>]

Parameters

Parameter	Type	Required	Description
`-PveTicket`	`PveTicket`	No	Ticket data connection.
`-AdvertiseSubnets`	`bool`	No	Advertise IP prefixes (Type-5 routes) instead of MAC/IP pairs (Type-2 routes).
`-Bridge`	`string`	No	The bridge for which VLANs should be managed.
`-BridgeDisableMacLearning`	`bool`	No	Disable auto mac learning.
`-Controller`	`string`	No	Controller for this zone.
`-Delete`	`string`	No	A list of settings you want to delete.
`-Dhcp`	`string`	No	Type of the DHCP backend for this zone. Values: `dnsmasq`.
`-Digest`	`string`	No	Prevent changes if current configuration file has a different digest. This can be used to prevent concurrent modifications.
`-DisableArpNdSuppression`	`bool`	No	Suppress IPv4 ARP && IPv6 Neighbour Discovery messages.
`-Dns`	`string`	No	dns api server.
`-Dnszone`	`string`	No	dns domain zone ex: mydomain.com.
`-DpId`	`int`	No	Faucet dataplane id.
`-Exitnodes`	`string`	No	List of cluster node names.
`-ExitnodesLocalRouting`	`bool`	No	Allow exitnodes to connect to EVPN guests.
`-ExitnodesPrimary`	`string`	No	Force traffic through this exitnode first.
`-Fabric`	`string`	No	SDN fabric to use as underlay for this VXLAN zone.
`-Ipam`	`string`	No	use a specific ipam.
`-LockToken`	`string`	No	the token for unlocking the global SDN configuration.
`-Mac`	`string`	No	Anycast logical router mac address.
`-Mtu`	`int`	No	MTU of the zone, will be used for the created VNet bridges.
`-Nodes`	`string`	No	List of cluster node names.
`-Peers`	`string`	No	Comma-separated list of peers, that are part of the VXLAN zone. Usually the IPs of the nodes.
`-Reversedns`	`string`	No	reverse dns api server.
`-RtImport`	`string`	No	List of Route Targets that should be imported into the VRF of the zone.
`-SecondaryControllers`	`array`	No	Additional controllers.
`-Tag`	`int`	No	Service-VLAN Tag (outer VLAN)
`-VlanProtocol`	`string`	No	Which VLAN protocol should be used for the creation of the QinQ zone. Values: `802.1q`, `802.1ad`.
`-VrfVxlan`	`int`	No	VNI for the zone VRF.
`-VxlanPort`	`int`	No	UDP port that should be used for the VXLAN tunnel (default 4789).
`-Zone`	`string`	Yes	The SDN zone object identifier.

Every parameter also binds by property name from the pipeline, so an object with node and vmid properties (the output of Get-PveGuest, for one) fills -Node and -Vmid. Without -PveTicket the cmdlet uses the last connection, see Connection.

Output

A PveResponse: the data returned by Proxmox VE is in .Response.data, the outcome in .IsSuccessStatusCode. See Results and Errors.