Set-PveClusterSdnFabricsFabric

Update a fabric

API: PUT /cluster/sdn/fabrics/fabric/{id}, Proxmox VE API viewer

Syntax

Set-PveClusterSdnFabricsFabric
    [-PveTicket <PveTicket>]
    [-Area <string>]
    [-CsnpInterval <float>]
    -Delete <array>
    [-Digest <string>]
    [-HelloInterval <float>]
    -Id <string>
    [-Ip6Prefix <string>]
    [-IpPrefix <string>]
    [-LockToken <string>]
    [-PersistentKeepalive <float>]
    -Protocol <string>
    -Redistribute <array>
    [-RouteFilter <string>]
    [<CommonParameters>]

Parameters

Parameter	Type	Required	Description
-PveTicket	PveTicket	No	Ticket data connection.
-Area	string	No	OSPF area. Either a IPv4 address or a 32-bit number. Gets validated in rust.
-CsnpInterval	float	No	The csnp_interval property for Openfabric.
-Delete	array	Yes
-Digest	string	No	Prevent changes if current configuration file has a different digest. This can be used to prevent concurrent modifications.
-HelloInterval	float	No	The hello_interval property for Openfabric.
-Id	string	Yes	Identifier for SDN fabrics.
-Ip6Prefix	string	No	The IP prefix for Node IPs.
-IpPrefix	string	No	The IP prefix for Node IPs.
-LockToken	string	No	the token for unlocking the global SDN configuration.
-PersistentKeepalive	float	No	A seconds interval, between 1 and 65535 inclusive, of how often to send an authenticated empty packet to the peer for the purpose of keeping a stateful firewall or NAT mapping valid persistently. For example, if the interface very rarely sends traffic, but it might at anytime receive traffic from another node, and it is behind NAT, the interface might benefit from having a persistent keepalive interval of 25 seconds. If unset or set to 0, it is turned off.
-Protocol	string	Yes	Type of configuration entry in an SDN Fabric section config. Values: openfabric, ospf, wireguard, bgp.
-Redistribute	array	Yes
-RouteFilter	string	No	A prefix list that should be used for filtering routes that are to be installed into the kernel routing table.

Every parameter also binds by property name from the pipeline, so an object with node and vmid properties (the output of Get-PveGuest, for one) fills -Node and -Vmid. Without -PveTicket the cmdlet uses the last connection, see Connection.

Output

A PveResponse: the data returned by Proxmox VE is in .Response.data, the outcome in .IsSuccessStatusCode. See Results and Errors.